Alcatel-Lucent 7750 SR OS Interface Configuration Manual page 361

n392dte
Syntax n392dte threshold
no n392dte
Context config>port>multilink-bundle>mlfr>frame-relay
Description
This command configures the DTE error threshold for the LMI.
Parameters count — Specify the number of errors that will place the bundle in an operationally down state.
n393dce
Syntax n393dce count
no n393dce
Context config>port>multilink-bundle>mlfr>frame-relay
Description
This command configures the DCE monitored event count for the LMI.
Parameters
count — Specify the diagnostic window used to verify link integrity on the DCE interface.
n393dte
Syntax n393dte count
no n393dte
Context config>port>multilink-bundle>mlfr>frame-relay
Description
This command configures the DTE monitored event count for the LMI.
Parameters
count — Specify the diagnostic window used to verify link integrity on the DTE interface.
t391dte
Syntax t391dte keepalive
no t391dte
Context config>port>multilink-bundle>mlfr>frame-relay
Description This command configures the DTE keepalive timer value for the LMI.
Parameters
keepalive — Specify the interval in seconds between status inquiries issued by the DTE.
7750 SR OS Interface Configuration Guide
Values 1 — 10
Values
1 — 10
Values
1 — 10
Interface Configuration
Page 361