Alcatel-Lucent 7750 SR OS Interface Configuration Manual page 435

adapt-qos
Syntax adapt-qos {distribute | link}
no adapt-qos
Context config>eth-tunnel>lag-emulation>access
Description
This command configures how the Ethernet Tunnel group SAP queue and virtual scheduler buffering
and rate parameters are adapted over multiple active MDAs.
The no form of the command reverts the default.
Default
no adapt-qos
Parameters
distribute — Each MDA will receive a fraction of the SAP and scheduler parameters.
link — The Ethernet Tunnel group will create the SAP queues and virtual schedulers with the actual
per-fp-ing-queuing
Syntax [no] per-fp-ing-queuing
Context config>eth-tunnel>lag-emulation>access
Description This command configures whether a more efficient method of queue allocation for Ethernet Tunnel
Group SAPs should be utilized.
The no form of the command reverts the default.
Default
no per-fp-ing-queuing
path-threshold
Syntax path-threshold num-paths
no path-threshold
Context config>eth-tunnel>lag-emulation
Description This command configures the behavior for the eth-tunnel if the number of operational members is
equal to or below a threshold level
Parameters
num-paths — Specifies the threshold for the Ethernet Tunnel group.
7750 SR OS Interface Configuration Guide
parameters on each MDA.
Values
0 — 15
Interface Configuration
Page 435