Alcatel-Lucent 7750 SR OS Interface Configuration Manual page 308

Configuration Commands
queue-policy
Syntax queue-policy name
no queue-policy
Context config>port>tdm>ds1>channel-group>network
config>port>tdm>e1>channel-group>network
Description
This command specifies an existing network policy to apply to the channel group.
queue-policy
Syntax queue-policy name
no queue-policy
Context config>card>mda>network>ingress
config>port>sonet-sdh>path>network
Description This command specifies the network-queue policy which defines queue parameters such as CBS,
high priority only burst size, MBS, CIR and PIR rates, as well as forwarding-class to queue
mappings. The network-queue policy is defined in the config>qos>network-queue context.
Default
default
Parameters name — Specifies an exisiting network-queue policy name.
ppp
Syntax ppp
Context config>port>sonet-sdh>path
config>port>tdm>ds1>channel-group
config>port>tdm>ds3
config>port>tdm>e1>channel-group
config>port>tdm>e3
Description
This command enables access to the context to configure the LCP operational parameters for a
SONET/SDH PoS link, a DS--3/E-3 port or channel, a DS-1/E-1 channel or a DS-0 channel.
Default
no ppp
compress
Syntax compress {acfc [pfc] | pfc [acfc]}
no compress
Context config>port>tdm>ds1>channel-group>ppp
Page 308 7750 SR OS Interface Configuration Guide