Configuration Commands
Table 29: DWDM Channel Numbers (Continued)
wavetracker
Syntax
wavetracker
Context
config>port>dwdm
Description
This command validates whether or not the port supports Wavetracker.
Default
None
power-control
Syntax
[no] power-control
Context
config>port>dwdm>wavetracker>power-control
Description
This command specifies whether the power control loop should be turned on to actively control the
laser's launch power to the specified target power. When power-control is disabled, the launch power
is set to the laser's maximum achievable power.
Default
no power-control
Parameters
no power-control — Laser output power is set to maximum.
power-control — Actively control the laser's output power to achieve the target power.
Page 282
100 GHz Grid
nm
THz
1562.23
191.90
1563.05
191.80
1563.86
191.70
C-Band
ITU
nm
Channel
19
1562.64
18
1563.45
17
7750 SR OS Interface Configuration Guide
50GHz Grid
THz
ITU
Channel
191.85
185
191.75
175