Service Management Tasks
Deleting a Card
In order to delete the card type provisioned for a specific slot, you must shutdown existing port
configurations and shutdown and remove all MDA or CMA configurations. For 7750 SR-c12/c4
systems, after removing MDA configurations, you may shutdown and remove the MCM from
service before modifying the card.
Use the following CLI syntax to delete a card provisioned for a specific slot:
CLI Syntax: config> port port-id
CLI Syntax: config> card slot-number
Deleting Port Parameters
Use the following CLI syntax to delete a port provisioned for a specific card:
CLI Syntax: config>port port-id
Use the following CLI syntax to delete a port provisioned for a specific card or CMA:
CLI Syntax: config>port port-id
Page 222
shutdown
card-type card-type
mcm mcm-number (for 7750 SR-c12/c4 only)
no mcm-type mcm-type
no shutdown
mda mda-number
no mda-type mda-type
no shutdown
shutdown
no port port-id
shutdown
7750 SR OS Interface Configuration Guide