Alcatel-Lucent 7750 SR OS Interface Configuration Manual page 260

Configuration Commands
Card Commands
card
Syntax card slot-number
no card slot-number
Context config
Description
This mandatory command enables access to the chassis card Input/Output Control Forwarding
Module (IOM), slot, MCM and MDA CLI context.
The no form of this command removes the card from the configuration. All associated ports, services,
and MDAs must be shutdown.
Default No cards are configured.
Parameters slot-number — The slot number of the card in the chassis.
capability
Syntax capability {sr | ess} [now]
Context config>card
Description
This command sets the desired capability for the associated slot and card.
By default, the capability will be set to that of the base chassis type. To set this to a non-default value,
the mixed-mode command must be enabled at the system level.
Changing the capability of a slot or card will result in the associated slot being reset. The card-type
must first be configured before the capability command can be issued.
Default capability ess on a 7450 chassis
Parameters
now — This optional keyword can be added to the interactive command to force the command to be
Page 260
Values 1 — 10 depending on chassis model.
SR-1: slot-number = 1
SR-7: slot-number = 1 — 5
SR-12: slot-number = 1 — 10
executed immediately without further question. If this keyword is not present, then the user will
be presented with a question to ensure they understand that as a result of this command, the
associated slots will be reset immediately to enable mixed-mode.
7750 SR OS Interface Configuration Guide