Alcatel-Lucent 7750 SR OS Interface Configuration Manual page 249

Ethernet Tunnel Commands
config
7750 SR OS Interface Configuration Guide
— eth-tunnel tunnel-id
— no eth-tunnel
— ccm-hold-time
— no ccm-hold-time
— description long-description-string
— no description
— ethernet
— encap-type {dot1q|qinq}
— no encap-type
— [no]
— hold-time
— member
— no member
— lag-emulation
— access
— path-threshold
— nopath-threshold
— [no] path path-index
— description
— no description
— control-tag
— no control-tag
— eth-cfm
— member
— no member
— precedence
— no precedence
— [no]
— protection-type
— revert-time time
— no revert-time
— [no] shutdown
{down down-timeout | up up-timeout}
mac ieee-address
down time
— adapt-qos {distribute | link}
— no adapt-qos
— [no] per-fp-ing-queuing
num-paths
description-string
vlan-id
— [no] mep mep-id domain md-index association ma-index
— [no] ccm-enable
— ccm-ltm-priority
— no ccm-ltm-priority
— [no] eth-test-enable
— test-pattern
— no
— low-priority-defect
con | errXcon | xcon | noXcon}
— mac-address
— no mac-address
— [no] control-mep
— [no] shutdown
pord-id
{primary | secondary}
shutdown
{g8031-1to1 | loadsharing}
Command Reference
priority
{all zeros | all-ones} [crc-enable]
test-pattern
{allDef | macRemErrXcon | remErrX-
mac-address
Page 249