Alcatel-Lucent 7750 SR OS Interface Configuration Manual page 455

Multi-Chassis Ring Commands
mc-ring
Syntax [no] mc-ring
Context config>redundancy>mc>peer
config>redundancy>multi-chassis>peer>sync
Description This command enables the context to configure the multi-chassis ring parameters.
ring
Syntax ring sync-tag [create]
no ring sync-tag
Context config>redundancy>mc>peer>mcr
Description
This command configures a multi-chassis ring.
Parameters
create — Keyword used to create the multi-chassis peer ring instance. The create keyword
in-band-control-path
Syntax in-band-control-path
Context config>redundancy>mc>peer>mcr>ring
Description
This command enables the context to configure multi-chassis ring inband control path parameters.
dst-ip
Syntax dst-ip ip-address
no dst-ip
Context config>redundancy>mc>peer>mcr>ring>in-band-control-path
config>redundancy>mc>peer>mcr>node>cv
7750 SR OS Interface Configuration Guide
Values
sync-tag
Specifies a synchronization tag to be used while synchronizing this port with the multi-chassis
peer.
requirement can be enabled/disabled in the environment>create context.
Interface Configuration
Page 455