Configuring Otu Port Parameters - Alcatel-Lucent 7750 SR OS Interface Configuration Manual

Configuring OTU Port Parameters

The following example displays an OTU port configuration:
*A:ALA-A>config>port>otu# info detail
----------------------------------------------
----------------------------------------------
The following example displays the show port <portId> otu detail for the default
OTU configuration above:
*A:ALA-A# show port 3/2/1 otu detail
===============================================================================
OTU Interface
===============================================================================
OTU Status
Async Mapping
Cfg Alarms
Alarm Status
SF/SD Method
SM-TTI Tx (auto)
SM-TTI Ex (bytes)
SM-TTI Rx
7750 SR OS Interface Configuration Guide
otu2-lan-data-rate 11.049
sf-sd-method fec
sf-threshold 5
sd-threshold 7
fec enhanced
no report-alarm otu-ais otu-ber-sd otu-tim otu-iae otu-biae fec-sd
no report-alarm fec-fail fec-uncorr odu-ais odu-oci odu-lck odu-bdi
no report-alarm odu-tim opu-tim opu-plm
report-alarm loc los lof lom otu-ber-sf otu-bdi fec-sf
sm-tti
tx auto-generated
expected auto-generated
no mismatch-reaction
exit
pm-tti
tx auto-generated
expected auto-generated
no mismatch-reaction
exit
psi-tti
tx auto-generated
expected auto-generated
no mismatch-reaction
exit
psi-payload
tx auto
expected auto
no mismatch-reaction
exit
: Enabled
: Disabled
: loc los lof lom otu-ber-sf otu-bdi fec-sf
:
: FEC
: ALA-A:3/2/1/C44
: (Not Specified)
: ALA-A:5/2/1/C34
Interface Configuration
FEC Mode : enhanced
Data Rate : 11.049 Gb/s
SF Threshold : 1E-5
SD Threshold : 1E-7
Page 195