Configuring Cards, MDA Carrier Modules (MCMs) and Media Dependent Adapters (MDAs)
Configuring Forwarding Plane Parameters
The following output provides a forwarding plane configuration. The fp command is not allowed
on iom-1 or iom-2 types. An error message appears when the command is executed on an incorrect
IOM type:
*A:Dut-C# configure card 10
*A:Dut-C>config>card# info
----------------------------------------------
----------------------------------------------
*A:Dut-C>config>card# exit
Page 152
MINOR: CLI This command is not supported for iom2-20g.
card-type iom3-xp
fp 1
ingress
mcast-path-management
bandwidth-policy "BWP"
no shutdown
exit
exit
exit
mda 1
mda-type m1-10gb
ingress
mcast-path-management
bandwidth-policy "BWP"
no shutdown
exit
exit
exit
mda 2
mda-type m2-10gb-xfp
ingress
mcast-path-management
bandwidth-policy "BWP"
no shutdown
exit
exit
exit
7750 SR OS Interface Configuration Guide