Alcatel-Lucent 7750 SR OS Interface Configuration Manual page 396

Configuration Commands
n393dte
Syntax n393dte number
no n393dte
Context config>port>sonet-sdh>path>frame-relay
config>port>tdm>ds1>channel-group>frame-relay
config>port>tdm>ds3>frame-relay
config>port>tdm>e1>channel-group>frame-relay
config>port>tdm>e3>frame-relay
Description
This command sets the DTE monitored event count for the Frame Relay Local Management Interface
(LMI).
The no form of this command returns the n393dte counter to the default value.
Default 4
Parameters
number — Specify the diagnostic window used to verify link integrity on the DTE interface.
t391dte
Syntax t391dte seconds
no t391dte
Context config>port>sonet-sdh>path>frame-relay
config>port>tdm>ds1>channel-group>frame-relay
config>port>tdm>ds3>frame-relay
config>port>tdm>e1>channel-group>frame-relay
config>port>tdm>e3>frame-relay
Description
This command sets the DTE keepalive timer for the Frame Relay Local Management Interface
(LMI).
This number specifies the period at which the DTE sends out a keepalive response request to the
DCE and updates status depending on the DTE error threshold value.
The no form of this command returns the t391dte keepalive timer to the default value.
Default 10
Parameters
seconds — Specify the interval in seconds between status inquiries issued by the DTE.
Page 396
Values
1 — 10
Values 5 — 30
7750 SR OS Interface Configuration Guide