Alcatel-Lucent 7750 SR OS Interface Configuration Manual page 258

Configuration Commands
config>port>tdm>ds1>channel-group
config>port>tdm>ds3
config>port>tdm>e1>channel-group
config>port>tdm>e3
config>lag
Description This command creates a text description for a configuration context to help identify the content in the
configuration file.
The no form of this command removes any description string from the context.
Default
No description is associated with the configuration context.
Parameters
long-description-string — The description character string. Strings can be up to 160 characters long
shutdown
Syntax [no] shutdown
Context config>card
config>card>mda
config>interface-group-handler
config>port
config>port>ethernet
config>port>sonet-sdh>path
config>port>tdm>ds1
config>port>tdm>ds1>channel-group
config>port>tdm>ds3
config>port>tdm>e1
config>port>tdm>e1>channel-group
config>port>tdm>e3
config>port>multilink-bundle>ima>test-pattern-procedure
config>port>sonet-sdh>path>atm>ilmi
config>lag
config>port>ethernet>efm-oam
config>redundancy>multi-chassis>peer
config>redundancy>mc>peer>mcr
config>redundancy>mc>peer>mc-lag
config>redundancy>mc>peer>mcr>ring
config>redundancy>mc>peer>mcr>node>cv
config>redundancy>multi-chassis>peer>sync
Description This command administratively disables an entity. When disabled, an entity does not change, reset, or
remove any configuration settings or statistics.
The operational state of the entity is disabled as well as the operational state of any entities contained
within.
The no form of this command administratively enables an entity.
Page 258
composed of printable, 7-bit ASCII characters. If the string contains special characters (#, $,
spaces, etc.), the entire string must be enclosed within double quotes.
7750 SR OS Interface Configuration Guide