Alcatel-Lucent 7750 SR OS Interface Configuration Manual page 439

Description
This command specifies the precedence to be used for the path. Only two precedence options are
supported: primary and secondary.
The no form of this command sets the precedence to the default value.
Default secondary
Parameters primary | secondary — specifies the path precedence as either primary or secondary.
eth-cfm
Syntax eth-cfm
Context config>eth-tunnel>path
Description This command enables the context to configure ETH-CFM parameters.
mep
Syntax [no] mep mep-id domain md-index association ma-index
Context config>eth-tunnel>path>eth-cfm
Description
This command provisions an 802.1ag maintenance endpoint (MEP).
The no form of the command reverts to the default values.
Parameters
mep-id — ppecifies the maintenance association end point identifier.
md-index — Specifies the maintenance domain (MD) index value.
ma-index — Specifies the MA index value.
ccm-enable
Syntax [no] ccm-enable
Context config>eth-tunnel>path>eth-cfm>mep
Description This command enables the generation of CCM messages.
The no form of the command disables the generation of CCM messages.
7750 SR OS Interface Configuration Guide
Values
1 — 81921
Values 1 — 4294967295
Values
1 — 4294967295
Interface Configuration
Page 439