Configuring Lag Parameters - Alcatel-Lucent 7210 SAS E OS Configuration Manual

Configuring Ports

Configuring LAG Parameters

LAG configurations should include at least two ports. Other considerations include:
•
•
•
The following example displays LAG configuration output:
A:ALA-A>config>lag# info detail
----------------------------------------------
----------------------------------------------
A:ALA-A>config>lag#
Page 54
A maximum of two ports can be included in a LAG. All ports in the LAG must share the
same characteristics (speed, duplex, hold-timer, etc.). The port characteristics are inherited
from the primary port.
Autonegotiation must be disabled or set limited mode for ports that are part of a LAG to
guarantee a specific port speed.
Ports in a LAG must be configured as full duplex.
description "LAG2"
mac 04:68:ff:00:00:01
port 1/1/1
port 1/3/1
7210 SAS E Interface Configuration Guide