8
Maintenance
Cleaning the Module
Cleaning the Module
The exterior of the instrument should be cleaned by wiping down with a soft cloth
moistened with dilute detergent solution, followed by wiping down with a cloth
moistened with de-ionized water. Ensure that no moisture enters the instrument.
Electrical shock and burns
WAR N IN G
Liquid in the module electronics can cause shock hazard and damage the
module.
Switch off and disconnect power cord from instrument before cleaning.
Do not use an excessively damp cloth during cleaning.
Drain all solvent lines before opening any fittings.
Allow the instrument to dry off completely before reconnecting power.
Agilent InfinityLab ELSD User Manual
87