• Install the O-ring (1) and brake hose connector (2).
CAUTION
!
Replace the O-ring (1) with a new one.
• Install the snap ring (3).
CAUTION
!
Do not reuse the snap ring (3).
1
2
3
Rear Brake Master Cylinder Parts Inspection
Refer to "Rear Brake Master Cylinder Disassembly and
Assembly (Page 4A-16)".
Master Cylinder
Inspect the master cylinder bore for any scratches or
other damage.
Cup Set
Inspect the cup set for other damage.
Brake Control System and Diagnosis:
Piston
Inspect the piston surface for any scratches or other
damage.
Rubber Parts
Inspect the primary cup, secondary cup and dust boot
for wear or damage.
Rear Brake Pedal Removal and Installation
Removal
1) Remove the right footrest bracket bolts (1).
I940H1410078-01
B940H24106018
2) Move and support the right footrest bracket and
remove the rear brake pedal boss bolt (2).
3) Remove the rear brake pedal.
I940H1410079-01
I822H1410045-01
I649G1410039-02
B940H24106019
1
I940H1410087-02
2
I940H1410084-01
4A-17