Rear Wheel Related Parts Inspection - Suzuki Intruder VZ1500 Service Manual

2D-12 Wheels and Tires:
3) Apply grease to the dust seal lip.
: Grease 99000–25010 (SUZUKI SUPER
GREASE A or equivalent)
4) Install the collar (1).
5) Install the rear wheel, rear axle and brake caliper
bracket.
6) Apply thread lock to the brake caliper bracket
mounting bolt (2) and tighten it to the specified
torque.
: Thread lock cement 99000–32130
(THREAD LOCK CEMENT SUPER 1360 or
equivalent)
Tightening torque
Rear brake caliper bracket mounting bolt (a): 94
N·m (9.4 kgf-m, 68.0 lbf-ft)
7) Install the washer (3) and rear axle nut (4).
8) Hold the rear axle with the special tool and tighten
the rear axle nut (4) to the specified torque.
Tightening torque
Rear axle nut (b): 100 N·m (10.0 kgf-m, 72.5 lbf-
ft)
Special tool
(A): 09944–28320 (Hexagon socket (19
mm))
1
I940H1240030-01
2
(a)
I940H1240031-03
(A)
9) Install the cap (5).
10) Install the brake caliper. Refer to "Rear Brake Caliper
Removal and Installation in Section 4C (Page 4C-
3)".

Rear Wheel Related Parts Inspection

Refer to "Rear Wheel Assembly Removal and
Installation (Page 2D-10)".
Tire
Refer to "Tire Inspection in Section 0B (Page 0B-16)".
Rear Brake Disc
Refer to "Rear Brake Disc Inspection in Section 4C
(Page 4C-7)".
Wheel Damper
Refer to "Wheel Dumper Inspection in Section 3A
(Page 3A-23)".
3
4
(b)
I940H1240032-01
5
I940H1240033-01
B940H22406009