Table of Contents
Advertisement
Assembly
Refer to "Fuel Mesh Filter Inspection (Page 1G-14)".
Assemble the fuel tank pump in the reverse order of the
disassembly. Pay attention to the following points:
CAUTION
!
• To prevent fuel leakage, insulator and O-
ring must be replaced with a new one.
• Apply engine oil lightly to insulator and of
the O-rings.
• Apply thin coat of the engine oil to the bushing.
• Install the fuel pump (1).
Fuel Mesh Filter Inspection
Inspect the fuel mesh filter in the following procedures:
1) Remove the fuel mesh filter. Refer to "Fuel Pump
Disassembly and Assembly (Page 1G-13)".
2) If the fuel mesh filter is clogged with foreign particles,
it hinders smooth gasoline flow resulting in loss of
engine power.
I822H1170023-01
NOTE
When the fuel mesh filter is dirtied
excessively, replace the fuel mesh filter with
a new one.
I822H1170024-01
3) Reinstall the fuel mesh filter. Refer to "Fuel Pump
Disassembly and Assembly (Page 1G-13)".
Fuel Injector / Fuel Delivery Pipe Removal and
Installation
Refer to "Throttle Body Removal and Installation in
I940H1170024-01
Section 1D (Page 1D-12)".
Fuel System:
1G-14
1
I940H1170025-01
B940H21706014
I940H1170026-01
B940H21706015
Advertisement
Chapters
Table of Contents
