Suzuki Intruder VZ1500 Service Manual page 214

1D-25 Engine Mechanical:
• Install the engine mounting plates (1).
• Insert the two mounting bolts from left side, and
tighten their nuts.
NOTE
The engine mounting nuts are self-locking.
Once the nuts have been removed, they are
no longer of any use.
3 " a "
LH
3. Engine mounting bolt (Front)
4. Engine mounting bolt (Rear lower)
5. Engine mounting bolt (Rear upper)
1
I940H1140365-01
RH
(b)
• Install the frame down tube (2).
• Tighten the bolts and nuts to the specified torque.
NOTE
The frame down tube nuts are self-locking.
Once the nuts have been removed, they are
no longer of any use.
Tightening torque
Frame down tube bolt (a): 50 N·m (5.0 kgf-m, 36.0
lbf-ft)
(a)
2
(a)
• Tighten all engine mounting bolts and nuts to the
specified torque, as shown in the following illustration.
LH
5 " a "
LH
4 " b "
"a": 215 mm (8.5 in)
"b": 195 mm (7.7 in)
: 55 N⋅m (5.5 kgf-m, 40.0 lbf-ft)
(a)
I940H1140366-01
I940H1140367-01
RH
(b)
RH
(b)
I940H1140313-03