Rear Brake Master Cylinder Parts Inspection - Suzuki VLR1800 Service Manual

• Apply grease to the push rod end.
: Grease 99000–25100 (SUZUKI Silicone
Grease or equivalent)
• Install the O-ring (1) and brake hose connector (2).
CAUTION
!
Replace the O-ring (1) with a new one.
• Install the snap ring (3).
CAUTION
!
Do not reuse the snap ring (3).
1
2
3
Brake Control System and Diagnosis:

Rear Brake Master Cylinder Parts Inspection

Refer to "Rear Brake Master Cylinder Disassembly and
Assembly (Page 4A-16)".
Master Cylinder
Inspect the master cylinder bore for any scratches or
other damage.
I822H1410042-01
Cup Set
Inspect the cup set for other damage.
Piston
Inspect the piston surface for any scratches or other
damage.
Rubber Parts
I822H1410043-03 Inspect the primary cup, secondary cup and dust boot
for wear or damage.
4A-17
B822H14106018
I822H1410044-02
I822H1410045-01
I649G1410039-02