Table of Contents
Advertisement
0B-15 Maintenance and Lubrication:
Front and Rear Brake Hose Inspection
1) Remove the seat, right frame head cover and fuel
tank. Refer to "Exterior Parts Construction in Section
9D (Page 9D-2)" and "Fuel Tank Removal and
Installation in Section 1G (Page 1G-9)".
2) Inspect the brake hoses and hose joints for crack,
damage or brake oil leakage. If any defects are
found, replace the brake hose with a new one. Refer
to "Front Brake Hose Removal and Installation in
Section 4A (Page 4A-8)" and "Rear Brake Hose
Removal and Installation in Section 4A (Page 4A-8)".
3) Reinstall the removed parts.
Brake Pedal Height Inspection and Adjustment
WARNING
!
Do not adjust the brake pedal height when
exhaust pipe is hot.
1) Inspect the brake pedal height "a" between the pedal
top face and footrest.
Adjust the brake pedal height if necessary.
I940H1020042-01
Brake pedal height "a"
Standard: 60 – 70 mm (2.4 – 2.8 in)
2) Remove the right footrest bracket bolts (1).
I940H1020043-02
3) Move and support the right footrest bracket and
loosen the lock-nut (2).
4) Turn the push rod (3) until the brake pedal height
becomes 60 – 70 mm (2.4 – 2.8 in) "a" above the top
of the footrest.
I940H1020044-01
I940H1020045-01
" a "
1
1
I940H1020070-01
Advertisement
Chapters
Table of Contents
