Table of Contents
Advertisement
Installation
Install the frame covers in the reverse order of removal.
Pay attention following point:
• When installing the frame cover, insert the convex part
"A" of the frame cover to the hole "B" of the frame
lower cover.
"A"
"B"
Rear Fender
Removal
1) Remove the front and rear seat.
2) Disconnect the rear combination light coupler (1).
3) Remove the seat lock (2).
2
4) Remove the rear fender brace bolt (4) and rear
frame mounting bolts, left and right (5).
5
I940H1940006-01
1
I940H1940007-01
5
4
I940H1940008-02
5) Remove the rear fender brace, rear fender extension
and rear fender as shown rear fender construction.
Refer to "Rear Fender Construction (Page 9D-4)".
Installation
Install the rear fender in the reverse order of removal.
Front Fender
Removal
• Remove the front fender mounting bolts.
• Remove the front fender.
Installation
Install the front fender in the reverse order of removal.
Frame Head Cover
Removal
1) Move the fuel tank backward. Refer to "Fuel Tank
Removal and Installation in Section 1G (Page 1G-
9)".
2) Remove the frame head covers (1), left and right.
"A"
"A": Hooked point
Installation
Install the frame head covers in the reverse order of
removal.
Exterior Parts:
9D-6
I940H1940009-01
1
I940H1940010-01
Advertisement
Chapters
Table of Contents
