Cylinder Head Cover Disassembly And Assembly - Suzuki Intruder VZ1500 Service Manual

Cylinder Head Cover Disassembly and
Assembly
Disassembly
1) Remove the head cover brackets (1) and (2), left and
right.
1
2) Remove the PAIR read valve cover (3) and PAIR
read valve (4).
3
3) Remove the valve timing inspection caps (5).
5
B940H21406022
2
I940H1140134-01
4
I940H1140135-01
5
I940H1140136-01
Assembly
1) Apply grease to the valve timing inspection cap O-
rings (1).
CAUTION
!
Replace the O-rings (1) with new ones.
: Grease 99000–25010 (SUZUKI SUPER
GREASE A or equivalent)
1
2) Install the valve timing inspection caps and tighten
the bolts (2) to the specified torque.
Tightening torque
Valve timing inspection cap bolt (a): 10 N·m (1.0
kgf-m, 7.0 lbf-ft)
2
(a)
3) Install the PAIR read valve and PAIR read valve
cover.
4) Apply thread lock to the bolts and tighten them.
: Thread lock cement 99000–32110
(THREAD LOCK CEMENT SUPER 1322 or
equivalent)
Engine Mechanical: 1D-44
1
I940H1140138-01
2
(a)
I940H1140137-03
I940H1140139-01