Secondary Driven Gear Related Parts Inspection - Suzuki Intruder VZ1500 Service Manual

3A-8 Drive Chain / Drive Train / Drive Shaft:
8) Install the coupling (8) and washer (9).
9) Tighten the coupling nut (10) to the specified torque
with the special tool.
CAUTION
!
Replace the coupling nut (10) with a new one.
Special tool
(D): 09924–64510 (Final driving gear
coupling holder)
Tightening torque
Secondary bevel gear coupling nut (b): 95 N·m (
9.5 kgf-m, 68.5 lbf-ft)
8
9
10) Lock the coupling nut (10) with a center punch.
10
Secondary Driven Gear Related Parts
Inspection
Refer to "Secondary Driven Gear Disassembly and
Assembly (Page 3A-5)".
Driven Bevel Gear
Inspect the driven bevel gear for wear or damage. If any
defects are found, replace the gear with a new one.
(D)
10
(b)
I940H1310045-03
I940H1310046-01
B940H23106005
Driven Bevel Gear Shaft
Inspect the driven bevel gear shaft for wear or damage.
If any defects are found, replace the driven bevel gear
shaft with a new one.
Bearing
Inspect the secondary bevel gear bearings, left and right
for abnormal noise and smooth rotation.
Replace the bearing if there is anything unusual. Refer
to "Secondary Driven Gear Disassembly and Assembly
(Page 3A-5)".
I822H1310030-01
I822H1310032-01
I940H1310055-01