Suzuki Intruder VZ1500 Service Manual page 261

Starter Torque Limiter / Starter Idle Gear
Install the starter idle gear (1) and starter torque limiter
(2). Refer to "Starter Torque Limiter / Starter Clutch
Removal and Installation in Section 1I (Page 1I-10)".
Starter Driven Gear
• Apply engine oil to the bushing of the starter driven
gear.
• Install the key (1).
1
2
I940H1140249-01
I940H1140250-01
1
I940H1140251-01
Generator
Install the generator component parts (1). Refer to
"Generator Removal and Installation in Section 1J
(Page 1J-5)".
Water Pump
• Apply grease to the O-ring.
CAUTION
!
Use a new O-ring to prevent oil leakage.
NOTE
When install the water pump, fit the convex
part "A" of the oil pump shaft onto the
concave part "B" of the water pump shaft.
: Grease 99000–25010 (SUZUKI SUPER
GREASE A or equivalent)
"B"
• Tighten the water pump mounting bolts.
Engine Mechanical: 1D-72
1
I940H1140252-01
"A"
I940H1140321-01
I940H1140253-01