Table of Contents
Advertisement
4) Click each button (2). At this time, if an operating sound is heard from the EVAP system purge control valve, the
function is normal.
Service Data
Injector
Item
Injector resistance
FI Sensors
Item
CKP sensor resistance
CKP sensor peak voltage
IAP sensor input voltage (F & R)
IAP sensor output voltage (F & R)
TP sensor input voltage
TP sensor resistance
TP sensor output voltage
ECT sensor input voltage
ECT sensor output voltage
ECT sensor resistance
IAT sensor input voltage
IAT sensor output voltage
IAT sensor resistance
TO sensor resistance
TO sensor voltage
GP switch voltage
Injector voltage
Ignition coil primary peak voltage
STP sensor input voltage
STP sensor output voltage
STV actuator resistance
HO2 sensor output voltage
HO2 sensor heater resistance
PAIR solenoid valve resistance
ISC valve resistance
EVAP system purge control solenoid
valve resistance
Engine General Information and Diagnosis:
Specifications
Specification
11 – 13 Ω at 23 °C (73 °F)
Specification
170 – 260 Ω
3.0 V and more
4.5 – 5.5 V
Approx. 2.6 V at idle speed
4.5 – 5.5 V
Closed
Approx. 1.1 kΩ
Opened
Approx. 4.3 kΩ
Closed
Approx. 1.1 V
Opened
Approx. 4.3 V
4.5 – 5.5 V
0.1 – 4.85 V
Approx. 2.45 kΩ at 20 °C (68 °F)
4.5 – 5.5 V
0.1 – 4.6 V
Approx. 2.5 kΩ at 20 °C (68 °F)
16.5 – 22.3 kΩ
Normal
Leaning
0.6 V and more
Battery voltage
150 V and more
4.5 – 5.5 V
Closed
Approx. 0.6 V
Opened
Approx. 4.2 V
Approx. 7 Ω
0.4 V and less at idle speed
0.6 V and more at 4 000 r/min
4.0 – 5.0 Ω at 23 °C (73 °F)
18 – 22 Ω at 20 – 30 °C (68 – 86 °F)
Approx. 20 Ω at 20 °C (68 °F)
Approx. 32 Ω at 20 °C (68 °F)
0.4 – 1.4 V
3.7 – 4.4 V
1A-96
2
I940H1110116-01
B940H21107001
Note
Note
When cranking
When leaning 65°
From 1st to Top
#2: (+) B, (–) Ground
#1: (+) W/Bl, (–) Ground
E-33 only
Advertisement
Chapters
Table of Contents
