Front Brake Pad Replacement - Suzuki Intruder VZ1500 Service Manual

Front Brake Pad Replacement

1) Remove the brake caliper by removing the caliper
mounting bolts (1).
2) Remove the pads (2) by removing the pad set pin
clip (3) and pad set pin (4).
2
CAUTION
!
Do not operate the brake lever and brake
pedal while dismounting the pads.
3) Clean up the caliper especially around the caliper
piston.
CAUTION
!
Replace the brake pads as a set, otherwise
braking performance will be adversely
affected.
B940H24206003
1
I940H1420002-01
3
4
I940H1420003-01
I940H1420004-01
4) Install the new brake pads.
5) Insert the pad set pin (4) and pad set pin clip (3) as
shown in the figure.
3
4
6) Tighten the brake caliper mounting bolts (1) to the
specified torque.
Tightening torque
Front brake caliper mounting bolt (a): 39 N·m (
3.9 kgf-m, 28.0 lbf-ft)
NOTE
After replacing the brake pads, pump the
brake lever several times to check for proper
brake operation and then check the brake
fluid level.
Front Brakes: 4B-2
4
3
I940H1420005-01
1
(a)
I940H1420006-01