Table of Contents
Advertisement
2D-4 Wheels and Tires:
3) Loosen the axle pinch bolts (1) on the left front fork
leg.
4) Remove the front axle (2) with the special tool and
then remove the front wheel.
NOTE
After removing the front wheel, install the
calipers temporarily to the original positions.
Special tool
(A): 09900–18740 (Hexagon socket (24
mm))
1
5) Remove the collar (3).
Installation
1) Apply grease to the collar (1) and install it.
: Grease 99000–25010 (SUZUKI SUPER
GREASE A or equivalent)
2
(A)
I940H1240004-03
3
I940H1240005-02
1
I940H1240007-01
2) Install the front wheel with the front axle and tighten
the front axle temporarily.
WARNING
!
The directional arrow on the tire should point
to the wheel rotation, when remounting the
wheel.
3) Tighten the front brake caliper mounting bolts (2) to
the specified torque.
Tightening torque
Front brake caliper mounting bolt (a): 39 N·m (
3.9 kgf-m, 28.0 lbf-ft)
WARNING
!
After remounting the brake calipers, pump
the brake lever until the pistons push the pad
correctly.
2
(a)
I940H1240009-01
2
(a)
I940H1240010-02
Advertisement
Chapters
Table of Contents
