Specifications; Service Data; Tightening Torque Specifications; Special Tools And Equipment - Suzuki Intruder VZ1500 Service Manual

Service Data

Suspension
Unit: mm (in)
Item
Rear shock absorber spring pre-set
length
Rear wheel travel
Swingarm pivot shaft runout

Tightening Torque Specifications

Fastening part
Cushion rod nut
Rear shock absorber mounting nut (Lower)
Swingarm pivot shaft nut
Rear shock absorber mounting nut (Upper)
Cushion lever mounting nut
NOTE
The specified tightening torque is described in the following.
"Rear Suspension Components (Page 2C-1)"
"Rear Suspension Assembly Construction (Page 2C-2)"
Reference:
For the tightening torque of fastener not specified in this section, refer to "Tightening Torque List in Section 0C
(Page 0C-8)".

Recommended Service Material

Material
Grease
NOTE
Required service material is also described in the following.
"Rear Suspension Components (Page 2C-1)"
"Rear Suspension Assembly Construction (Page 2C-2)"

Specifications

Special Tools and Equipment

SUZUKI recommended product or Specification
SUZUKI SUPER GREASE A or
equivalent
Standard
192 (7.56)
108 (4.3)
—
Tightening torque
N⋅m kgf-m
132 13.2
65 6.5
100 10.0
65 6.5
132 13.2
P/No.: 99000–25010
Rear Suspension:
B940H22307001
Limit
—
0.3 (0.01)
B940H22307002
Note
lbf-ft
95.5 (Page 2C-5)
47.0 (Page 2C-5)
72.5 (Page 2C-5)
47.0 (Page 2C-5)
95.5 (Page 2C-6)
B940H22308001
Note
(Page 2C-9) / (Page 2C-
11)
2C-12