Wheel Balance Check And Adjustment; Specifications; Service Data - Suzuki Intruder VZ1500 Service Manual

2D-18 Wheels and Tires:
• Install the air valve (2) in the wheel (3).
CAUTION
!
• Be careful not to damage the lip (4) of the
valve.
• Replace the air valve with a new one.
NOTE
To properly install the valve into the valve
hole, apply a special tire lubricant or neutral
soapy liquid to the valve.
4
2. Valve 3. Wheel

Service Data

Wheel
Unit: mm (in)
Item
Wheel rim runout
Wheel axle runout
Wheel rim size
3
2
I718H1240055-01
4. Valve lip

Specifications

Front & Rear
Front & Rear
Front
Rear

Wheel Balance Check and Adjustment

Check and adjust the wheel balance in the following
procedures:
1) Removal the wheel assembly. Refer to "Front Wheel
Assembly Removal and Installation (Page 2D-3)"
and "Rear Wheel Assembly Removal and Installation
(Page 2D-10)".
2) Check the wheel balance using the balancer and
adjust the wheel balance if necessary.
CAUTION
!
For operating procedures, refer to the
instructions supplied by the wheel balancer
manufacturer.
3) When installing the balancer weight to the wheel, set
the balancer weight on center rib of the wheel.
4) Recheck the wheel balance.
5) Install the wheel assembly. Refer to "Front Wheel
Assembly Removal and Installation (Page 2D-3)"
and "Rear Wheel Assembly Removal and Installation
(Page 2D-10)".
Standard
Axial
—
Radial
—
18 M/C x MT 3.50
17 M/C x MT 6.00
B940H22406014
I940H1240041-01
B940H22407001
Limit
2.0 (0.08)
0.25 (0.010)
—
—