Specifications; Service Data - Suzuki Intruder VZ1500 Service Manual

4A-18 Brake Control System and Diagnosis:
Installation
Install the rear brake pedal in the reverse order of
removal. Pay attention to the following points:
• When installing the rear brake pedal, position the
punched mark "A" of the brake rod and slit "B" of the
brake pedal.
• Tighten the rear brake pedal boss bolt (1) to the
specified torque.
Tightening torque
Rear brake pedal boss bolt (a): 16 N·m (1.6 kgf-
m, 11.5 lbf-ft)
1
(a)
"B"

Service Data

Brake
Unit: mm (in)
Item
Rear brake pedal height
Brake disc thickness
Brake disc runout
Master cylinder bore
Master cylinder piston diam.
Brake caliper cylinder bore
Brake caliper piston diam.
Brake fluid type
"A"
I940H1410085-01

Specifications

Front
Rear
Front & Rear
Front
Rear
Front
Rear
Front
Rear
Front
Rear
• Apply thread lock to the right foot bracket bolts (2) and
tighten them to the specified torque.
: Thread lock cement 99000–32110
(THREAD LOCK CEMENT SUPER 1322 or
equivalent)
Tightening torque
Front footrest bracket bolt (b): 50 N·m (5.0 kgf-m,
36.0 lbf-ft)
Standard
60 – 70 (2.4 – 2.8)
4.3 – 4.7 (0.169 – 0.185)
6.6 – 7.0 (0.260 – 0.276)
—
15.870 – 15.913 (0.6248 – 0.6265)
15.870 – 15.913 (0.6248 – 0.6265)
15.827 – 15.854 (0.6231 – 0.6242)
15.827 – 15.854 (0.6231 – 0.6242)
30.230 – 30.306 (1.1902 – 1.1931)
30.230 – 30.306 (1.1902 – 1.1931)
30.150 – 30.200 (1.1870 – 1.1890)
30.150 – 30.200 (1.1870 – 1.1890)
DOT 4
2
(b)
I940H1410086-01
B940H24107001
Limit
—
4.0 (0.16)
6.3 (0.25)
0.30 (0.012)
—
—
—
—
—
—
—
—
—
—
—