Throttle Cable Routing Diagram - Suzuki Intruder VZ1500 Service Manual

Throttle Cable Routing Diagram

1
3
1. Throttle cable No. 1
2. Throttle cable No. 2
3. Front brake hose
4. Clutch cable
5. Cable guide
6. Gearshift rod
"a": 1 mm (0.04 in)
"b": 6 mm (0.24 in) or more
: Clutch cable must be passed above the radiator hose with
keeping clearance of 6 mm (0.24 in) or more from the gearshift rod.
2
"A"
5
4
IN
FWD
OUT
4
"D"
1
2
4
" a "
"B"
"C"
"E"
4
" b "
6
"A": Pass the throttle cables behind the cable guide. Pass the brake hose in
front of the cable guide.
"B": Pass the throttle cables right side of the frame head pipe, and the clutch
cable left.
"C": Pass the throttle cables between the frame bridge and radiator conduction
hose.
"D": Pass the clutch cable behind the frame down tube.
"E": Pass the clutch cable inside the engine mounting plate.
"F": Adjust the clutch cable play on engine side adjuster with the lever side
adjuster thread 3 – 5 mm (0.12 – 0.20 in) left.
: 4.5 N⋅m (0.45 kgf-m, 3.0 lbf-ft)
Engine Mechanical:
B940H21402001
" a "
(a)
"F"
I940H1140323-06
1D-2