Chapter 1: Avaya Ethernet Routing Switch 4500 Regulatory Information And Safety Precautions; International Regulatory Statements Of Conformity; National Electromagnetic Compliance (Emc) Statements Of Compliance; Fcc Statement (Usa Only) - Avaya 4500 Series Installation Manual

Chapter 1: Avaya Ethernet Routing Switch

International regulatory statements of conformity

This is to certify that the Avaya Ethernet Routing Switch 4500 Series was evaluated to the
international regulatory standards for electromagnetic compliance (EMC) and safety and were
found to have met the requirements for the following international standards:
• EMC - Electromagnetic Emissions - CISPR 22, Class A
• EMC - Electromagnetic Immunity - CISPR 24
• Electrical Safety - IEC 60950, with CB member national deviations
Further, the equipment has been certified as compliant with the national standards as detailed
below.
National electromagnetic compliance (EMC) statements of
compliance

FCC statement (USA only)

This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the Federal Communications Commission (FCC) rules. These limits are
designed to provide reasonable protection against harmful interference when the equipment
is operated in a commercial environment. This equipment generates, uses, and can radiate
radio frequency energy. If it is not installed and used in accordance with the instruction manual,
it may cause harmful interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference, in which case users will be required to
take whatever measures may be necessary to correct the interference at their own expense.
Installation
4500 regulatory information and
safety precautions
November 2010 5