2.2 Mechanical Installation
Reattaching the Top Protective Cover
Tighten the screws at the four corners of the cover with a straight-edge screwdriver and then reattach the top protective
cover.
Figure 2.8
◆ Digital Operator Remote Usage
Remote Operation
■
The digital operator mounted on the drive can be removed and connected to the drive using an extension cable up to 3 m
long to facilitate operation when the drive is installed in a location where it cannot be easily accessed.
The digital operator can also be permanently mounted in remote locations such as panel doors using an extension cable
and an installation support set (depending on the installation type).
Note:
Refer to Drive Options and Peripheral Devices on page 353
Figure 2.9
46
Figure 2.8 Reattaching the Top Protective Cover
for information on extension cables and installation support sets.
Drive
Comm. Port
Figure 2.9 Communication Cable Connection
YASKAWA ELECTRIC SIEP C710616 38F YASKAWA AC Drive - L1000A Technical Manual
Y E A _
T M o n
ly
Operator
S / N : J007XE273710001
common_
TMonly
Communication Cable Connector