Cooling Fan Replacement: Cimr-Lu40075 And 40091 - YASKAWA L1000A Technical Manual

5.
While pressing in on the hooks located on the left and right sides of the fan cover, free the fan cover by lifting the
back end first.
Figure 7.12
Figure 7.12 Reattach the Fan Cover: 20085, 20115, 40045, 40060, 50032, and 50041
6.
Turn the power supply back on and reset the cooling fan operation time for the Maintenance Monitor by setting
o4-03 to 0.
◆ Cooling Fan Replacement: CIMR-LU40075 and 40091
WARNING! Electrical Shock Hazard. Do not connect or disconnect wiring while the power is on. Failure to comply can result in serious
personal injury. Before servicing the drive, disconnect all power to the equipment. The internal capacitor remains charged even after
the power supply is turned off. After shutting off the power, wait for at least the amount of time specified on the drive before touching
any components.
CAUTION! Burn Hazard. Do not touch a hot drive heatsink. Failure to comply could result in minor or moderate injury. Shut off the
power to the drive when replacing the cooling fan. To prevent burns, wait at least 15 minutes and ensure the heatsink has cooled down.
NOTICE: Equipment Hazard. Follow cooling fan replacement instructions. The cooling fan cannot operate properly when it is installed
incorrectly and could seriously damage the drive. Follow the instructions in this manual to replace the cooling fan, making sure that the
label is on top before inserting the cooling fan into the drive. To ensure maximum useful product life, replace both cooling fans when
performing maintenance.
Removing the Cooling Fan
■
1.
While pressing in on the hooks located on the left and right sides of the fan finger guard, free the fan finger guard
by lifting the back end first.
Figure 7.13
YASKAWA ELECTRIC SIEP C710616 38F YASKAWA AC Drive - L1000A Technical Manual
Figure 7.13 Removing the Cooling Fan Cover: 40075 and 40091
7.4 Drive Cooling Fans and Circulation Fans
YEA_
TMonly
YEA_
TMonly
331
7