2.2 Mechanical Installation
u
Digital Operator Remote Usage
n
Remote Operation
The digital operator mounted on the drive can be removed and connected to the drive using an extension cable up to 3 m long
to facilitate operation when the drive is installed in a location where it can not be easily accessed.
The digital operator can also be permanently mounted remote locations such as panel doors using an extension cable and an
installation support set (depending on the installation type).
Note:
Refer to Drive Options and Peripheral Devices on page 361
42
Figure 2.4 IP20/NEMA 1 Side-by-Side Mounting in Enclosure
Drive
Comm Port
Figure 2.5 Communication Cable Connection
YASKAWA ELECTRIC SIEP C710616 31B YASKAWA AC Drive – A1000 Technical Manual
for information on extension cables and installation support sets.
Operator
S/N
J007XE273710001
Communication Cable Connector