Digital Operator Remote Usage - YASKAWA L1000V Technical Manual

u Digital Operator Remote Usage
n
Remote Operation
An optional digital LCD operator (JVOP-180) can be connected to the drive using an extension cable up to 3 m long to
facilitate operation when the drive is installed in a location where it can not be easily accessed.
The digital operator can also be permanently mounted in remote locations such as panel doors using an extension cable
and an installation support set (depending on the installation type).
Note: Refer to Drive Options and Peripheral Devices on page 206
Figure 2.4
n
Digital Operator Remote Installation
Digital Operator Dimensions
Installation Types and Required Materials
The digital operator can be mounted to an enclosure in two different ways:
External/face-mount installs the operator outside the enclosure panel
1.
Internal/flush-mount installs the operator inside the enclosure panel
2.
YASKAWA EUROPE SIEP
Drive
Comm Port
Figure 2.4 Digital LCD Operator Connection
12.2
1.6
YEG
7.9
60
Minimum
50
Figure 2.5 Digital Operator Dimensions
YASKAWA AC Drive L1000V Technical Manual
for information on extension cables and installation support sets.
Operator
S / N : J007XE273710001
Communication Cable Connector
Installation holes (2-M3 screws, depth 5)
S / N : J007XE273710001
44
2.2 Mechanical Installation
Unit: mm
2
33