D.2 European Standards - YASKAWA L1000A Technical Manual

D.2 European Standards

D.2 European Standards
Figure D.1
The CE mark indicates that a product is in compliance with applicable European Directives for safety and environmental
regulations. It is required for engaging in business and commerce in Europe.
The applicable European Directives for this product are as follows. We declared the CE marking based on the harmonized
standards in the following table.
Applicable European Directive
Low Voltage Directive (2006/95/EC)
EMC Directive (2004/108/EC)
Machinery Directive (2006/42/EC)
<1> These standards are in compliance for models CIMR-LF only.
The user(s) is solely responsible for ensuring that the end products used with this drive comply with all applicable
European directives and with other national regulations (if required).
Note: 600 V class drives (models 5) are not compliant with European Standards.
◆ CE Low Voltage Directive Compliance
This drive has been tested according to European standard IEC/EN 61800-5-1, and it fully complies with the Low Voltage
Directive.
To comply with the Low Voltage Directive, be sure to meet the following conditions when combining this drive with
other devices:
■ Area of Use
Do not use drives in areas with pollution higher than degree 2 and overvoltage category 3 in accordance with IEC/EN
664.
Factory Recommended Branch Circuit Protection
■
Drive Model
Nominal Output
CIMR-LU
Power HP
20008
20011
20014
20018
20025
20033
20047
20060
20075
20085
20115
474
Table D.1 Recommended Input Fuse Selection
AC Drive Input
Amps
2 7.5
3 11
3 15.6
5 18.9
7.5 28
10 37
15 52
20 68
25 80
30 82
40 111
Figure D.1 CE Mark
IEC/EN 61800-5-1: 2007
EN 61800-3: 2004/A1: 2012
IEC 61800-3: 2004/A1: 2011
ISO/EN ISO 13849-1/AC: 2009
IEC/EN 62061: 2005 (SILCL3)
IEC/EN 61800-5-2: 2007 (SIL3)
L1000
MCCB Rating Time Delay Fuse
Amps Rating Amps
<1> <2>
Three-Phase 200 V Class
15 12
20 17.5
25 25
35 30
50 40
60 60
100 90
125 110
150 125
150 125
200 175
YASKAWA ELECTRIC SIEP C710616 38F YASKAWA AC Drive - L1000A Technical Manual
Applicable Harmonized Standards
<1>
<1>
<1>
Non-time Delay
Fuse Rating Amps Semi-conductor Fuse Rating
(Fuse Ampere)
<3>
20
30
40
50
75 FWH-100B (100)
100 FWH-200B (200)
150 FWH-200B (200)
200 FWH-200B (200)
225 FWH-300A (300)
225 FWH-300A (300)
250 FWH-350A (350)
Bussmann
<4>
FWH-70B (70)
FWH-70B (70)
FWH-90B (90)
FWH-90B (90)