Ptx1000 Ac Power Specifications; Ptx1000 Ac Power Cord Specifications; Table 12: Ptx1000 Power Supply Led; Table 13: Ptx1000 Ac Power Specifications - Juniper PTX1000 Hardware Manual

PTX1000 Packet Transport Router Hardware Guide

Table 12: PTX1000 Power Supply LED

Name Color State
Status Unlit Off
Green On steadily
Slow blinking (1 Hz)
Blinking (2 Hz)
Amber On steadily
Blinking

PTX1000 AC Power Specifications

Table 13: PTX1000 AC Power Specifications

Item
AC input voltage
AC input line frequency
AC input current rating
Typical power consumption
Maximum power consumption

PTX1000 AC Power Cord Specifications

40
Use Table 12 on page 40 to interpret the state of the power supply LED.
Description
There is no power to any of the power supplies.
The power supply is on and operating correctly.
The power supply is in cold standby mode; only the 12 VDC input is present.
The power supply is uploading firmware.
Either the power cord is unplugged or a major error is detected in the power supply.
Examples of a major error are power supply failure, overvoltage protection error,
overcurrent protection error, a fan failure.
If the power cord is unplugged or missing, reattach the power cord appropriate
for your country.
If a major error is occurring, replace the power supply as soon as possible. To
maintain proper airflow through the chassis, leave the power supply installed in
the chassis until you are ready to replace it.
Warning events are being detected; the power supply continues to operate. Often
these events are because of rising temperatures. Check the fan modules and the
fans in the power supplies and ensure there is proper airflow through the chassis.
Table 13 on page 40 describes the AC power specifications for a PTX1000.
Detachable AC power cords are shipped with the chassis if you include them as part of
your order. The coupler is type C13 as described by International Electrotechnical
Commission (IEC) standard 60320. The plug at the male end of the power cord fits into
the power source outlet that is standard for your geographical location.
Specifications
Operating range: 100–240 VAC
50–60 Hz
14 A at 100–120 VAC
1050 W
1425 W
Copyright © 2018, Juniper Networks, Inc.