Figure 26: Ac Plug Types; Table 47: Ac Power Cord Specifications - Juniper M7i Hardware Manual

M7i Multiservice Edge Router Hardware Guide

Table 47: AC Power Cord Specifications

Country
Australia
Europe (except Italy and United Kingdom)
Italy
North America
United Kingdom
Related
Documentation
84
NOTE: In North America, AC power cords must not exceed 4.5 m
(approximately 14.75 ft) in length, to comply with National Electrical Code
(NEC) Sections 400-8 (NFPA 75, 5-2.2) and 210-52, and Canadian Electrical
Code (CEC) Section 4-010(3). The cords supplied with the router are in
compliance.
Table 47 on page 84 provides specifications and
on the AC power cord provided for each country or region.
Electrical Specification
240 VAC, 50 Hz AC
220 or 230 VAC, 50 Hz AC
230 VAC, 50 Hz AC
120 VAC, 60 Hz AC
240 VAC, 50 Hz AC

Figure 26: AC Plug Types

Australia China
(SAA/3)
(PSB-10)
Japan North America
(L6-20P) (L6-20P)
NOTE: Power cords and cables must not block access to router components
or drape where people could trip on them.
M7i AC Power Supply on page 60
Connecting Power to an AC-Powered M7i Router on page 123
Figure 26 on page 84
Plug Type
SAA/3
CEE 7/7
CEI 23-16
NEMA 5-15P
BS89/13
Europe Italy
(CEE 7/7) (CEI 23-16/VII)
North America
UK
NEMA
(BS89/13)
(L6-20)
Copyright © 2019, Juniper Networks, Inc.
depicts the plug