Acx1100 Ac Power Specifications; Acx1100 Ac Power Cord Specifications - Juniper ACX1000 Hardware Manual

ACX1100 AC Power Specifications

Table 14 on page 61 lists the AC power system electrical specifications.
Table 14: AC Power System Electrical Specifications
Item
AC input voltage
AC input line frequency
AC system current rating
AC system input power
Maximum AC power supply output
NOTE: We recommend that you use a dedicated customer site circuit breaker rated for
2 A (100 VAC) or 1 A (240 VAC), or as required by local code. Doing so enables you to operate
the router in any configuration without upgrading the power infrastructure.
SEE ALSO

ACX1100 AC Power Cord Specifications | 61

ACX1100 AC Power Cord Specifications
Each AC power supply has a single AC appliance inlet that requires a dedicated AC power feed. Most
sites distribute power through a main conduit that leads to frame-mounted power distribution panels,
one of which can be located at the top of the rack that houses the router. An AC power cord connects
each power supply to the power distribution panel.
Specification
Operating range: 100 to 240 VAC
50 to 60 Hz (nominal)
2 A (100 VAC) or 1 A (240 VAC)
85 W
70 W
61