Ac Power Cord Specifications - Juniper MX204 Hardware Manual

MX204 3D Universal Edge Router Hardware Guide
AC Power Cord Specifications for MX204 Routers
Table 24: AC Power Cord Specifications
Country/Region
Argentina
Australia
Brazil
China
Europe (except Italy,
Switzerland, and United
Kingdom)
India
Israel
Italy
Japan
Korea
46
Prevention of Electrostatic Discharge Damage on page 156
A detachable AC power cord is supplied with the AC power supply modules. The coupler
is type C13 as described by International Electrotechnical Commission (IEC) standard
60320. The plug at the male end of the power cord fits into the power source outlet that
is standard for your geographical location.
CAUTION: The AC power cord provided with each power supply is intended
for use with that power supply only and not for any other use.
NOTE: In North America, AC power cords must not exceed 4.5 meters
(approximately 14.75 feet) in length, to comply with National Electrical Code
(NEC) Sections 400-8 (NFPA 75, 5-2.2) and 210-52 and Canadian Electrical
Code (CEC) Section 4-010(3). The cords supplied with the switch are in
compliance.
Table 24 on page 46 gives the AC power cord specifications for the countries and regions
listed in the table.
Electrical Specifications
250 VAC, 10 A, 50 Hz
250 VAC, 10 A, 50 Hz
250 VAC, 10 A, 50 Hz
250 VAC, 10 A, 50 Hz
250 VAC, 10 A, 50 Hz
250 VAC, 10 A, 50 Hz
250 VAC, 10 A, 50 Hz
250 VAC, 10 A, 50 Hz
125 VAC, 12 A, 50 Hz or 60 Hz
250 VAC, 10 A, 50 Hz or 60 Hz
Plug Standards
IRAM 2073 Type RA/3
AS/NZZS 3112 Type SAA/3
NBR 14136 Type BR/3
GB 1002-1996 Type PRC/3
CEE (7) VII Type VIIG
IS 1293 Type IND/3
SI 32/1971 Type IL/3G
CEI 23-16 Type I/3G
SS-00259 Type VCTF
CEE (7) VII Type VIIGK
Copyright © 2018, Juniper Networks, Inc.
Juniper Model Number
CBL-EX-PWR-C13-AR
CBL-EX-PWR-C13-AU
CBL-EX-PWR-C13-BR
CBL-EX-PWR-C13-CH
CBL-EX-PWR-C13-EU
CBL-EX-PWR-C13-IN
CBL-EX-PWR-C13-IL
CBL-EX-PWR-C13-IT
CBL-EX-PWR-C13-JP
CBL-EX-PWR-C13-KR