Unpacking The M320 Router; M320 Router Installation Summary; Tools And Parts Required To Unpack The M320 Router - Juniper M320 Hardware Manual

CHAPTER 4

Unpacking the M320 Router

M320 Router Installation Summary

Related
Documentation

Tools and Parts Required to Unpack the M320 Router

Copyright © 2010, Juniper Networks, Inc.
M320 Router Installation Summary on page 49
Tools and Parts Required to Unpack the M320 Router on page 49
Unpacking the M320 Router on page 50
Verifying the M320 Router Parts Received on page 51
After you have prepared your installation site as described in "M320 Site Preparation
Checklist Requirements" on page 41, you are ready to unpack and install the router. It is
important to proceed through the installation process in the following order:
Review the safety guidelines explained in "General Safety Guidelines for M Series, MX
1.
Series, and T Series Routers" on page 211.
Unpack the router and verify the parts received.
2.
Install the mounting hardware.
3.
See "Installing the M320 Mounting Hardware for a Four-Post Rack or Cabinet" on
page 56or "Installing the M320 Mounting Hardware for Open-Frame Racks" on page 60.
Install the chassis.
4.
See "Installing the M320 Router Using a Mechanical Lift" on page 63 or "Installing the
M320 Chassis in the Rack Manually" on page 79.
Perform the initial system startup as described in "Initially Configuring the M320
5.
Router" on page 103.
M320 Chassis Lifting Guidelines on page 216
To unpack the router and prepare for installation, you need the following tools:
Phillips (+) screwdriver, number 2
1/2-in. or 13-mm open-end or socket wrench to remove bracket bolts from the shipping
pallet
49