Configuring Basic Network Settings - Avaya Scopia XT Series User Manual

3. Press 1 to highlight the triangle in the top left corner in blue.
4. Use the arrow keys to position the image, so all sides of the white border of the triangle are
5. Press 2 to highlight the triangle in the bottom right corner in blue.
6. Adjust the image position in the same way, until all sides of the triangle border are visible,
7. To continue with the Quick Setup Wizard, select Next (see

Configuring Basic Network Settings

About this task
This procedure describes how to set up the basic network settings and the IP address of the XT Series
as part of the Quick Setup Wizard. To modify advanced network settings, see Deployment Guide for
Avaya Scopia
Procedure
1. Access the Quick Setup Wizard from the endpoint, as described in
User Guide for Avaya Video Collaboration Solution for IP Office
Version 8.3
Figure 12: Examining the image position
visible in the screen, then press ok/menu.
then press ok/menu.
Settings on page 18).
®
XT Series.
Settings with the Quick Setup Wizard
Configuring Basic Network
on page 15, and skip to this step.
Configuring Basic
Getting Started | 18