Configuring Basic Network Settings - Avaya Scopia XT7100 User Manual

3. Press 1 to highlight the triangle in the top left corner in blue.
4. Use the arrow keys to position the image, so all sides of the white border of the triangle are
visible in the screen, then press ok/menu.
5. Press 2 to highlight the triangle in the bottom right corner in blue.
6. Adjust the image position in the same way, until all sides of the triangle border are visible,
then press ok/menu.
7. To continue with the Quick Setup Wizard, select Next (see
Settings on page 31).
Related Links
Configuring Basic Settings with the Quick Setup Wizard

Configuring Basic Network Settings

About this task
This procedure describes how to set up the basic network settings and the IP address of the XT
Series as part of the Quick Setup Wizard. To modify advanced network settings, see Deployment
Guide for Avaya Scopia
Procedure
1. Access the Quick Setup Wizard from the endpoint, as described in
Settings with the Quick Setup Wizard
April 2015
Figure 19: Examining the image position
®
XT Series.
on page 27, and skip to this step.
Comments? infodev@avaya.com
Configuring Basic Settings with the Quick Setup Wizard
Configuring Basic Network
on page 27
Avaya Scopia
Configuring Basic
®
XT Series User Guide
31