Adjusting The Image Position - Avaya Scopia XT7000 Series Deployment Manual

Field
Use as
2. To adjust the image on your monitor, select Next and continue with
Position on page 101.
If performing the quick setup from the web interface, access the quick setup from the
endpoint to adjust the image. This can be done at any time.
Related links
Configuring Basic Settings with the Quick Setup Wizard

Adjusting the Image Position

About this task
You can center the endpoint's image correctly on its monitor in this stage of the Quick Setup Wizard.
This is for deployments with a monitor connected to your Avaya Scopia
Procedure
1. Access the Quick Setup Wizard from the endpoint, as described in
Settings with the Quick Setup Wizard
2. Decide if the monitor's image needs adjusting, by verifying if the white border of the triangles
in the top left and bottom right corners are fully visible on all sides.
January 2017
Configuring Basic Settings with the Quick Setup Wizard
Description
You can register the endpoint to as many as three SIP servers
(see Registering the XT Series to a SIP Server
• H.323 and SIP: Select if you are registering the endpoint to both a
gatekeeper and a SIP server. The wizard displays both the
gatekeeper and SIP server configuration pages. For more
information, see Configuring Basic Gatekeeper Settings
page 104 and Configuring Basic SIP Settings
contact your administrator.
(XT Executive only) Select whether this endpoint is used with
different computers:
• Select Personal Executive endpoint for a single user, where you
pair the computer once to the XT Series using Avaya Scopia
Control.
• Select Shared Executive endpoint for multiple users, where you
pair the computer afresh with Avaya Scopia
time you connect.
• Select Standard Room endpoint for multiple users, if you do not
want to control the endpoint using a keyboard and mouse via
®
Avaya Scopia XT Control. The endpoint is automatically set up
with the default settings of other XT Series models, rather than the
XT Executive. For example, the monitor displays the system
menus when you are not in a call (as opposed to the computer
content, which is the default for XT Executive).
on page 98.
®
Avaya Scopia XT Series Deployment Guide
Comments on this document? infodev@avaya.com
®
Adjusting the Image
on page 98
®
XT Series.
Configuring Basic
on page 124).
on
on page 105, or
®
XT
XT Control each
101