Configuring Avaya Cu360 To Automatically Share Content - Avaya CU360 Installing And Administering

Initial administration
Name
Call Type
Call Rate (Kbps)

Configuring Avaya CU360 to automatically share content

About this task
Configure Avaya CU360 to automatically share content when you connect your computer with
Avaya CU360 using Avaya Screen Link.
Before you begin
Your computer:
• Must have Avaya IX
• Must be connected to the same network as Avaya CU360. If your computer and Avaya
CU360 are connected to different networks, NAT or a firewall must not be configured
between the two networks.
Procedure
1. Select Configure.
Avaya CU360 displays the Configure window.
2. Select Advanced.
The default PIN is 1234.
If your administrator configured a PIN to gain access to the advanced settings, Avaya
CU360 prompts you to the enter PIN. After you enter the PIN, Avaya CU360 displays the
Advanced window.
3. Select Presentation.
Avaya CU360 displays the Presentation window.
4. Configure Local Presentation Mode to Automatic.
Result
Avaya CU360 automatically displays shared content on the screen to local participants when the
endpoint is not participating in meetings. The endpoint also displays alerts for incoming calls.
July 2020
™
Workplace Client installed.
Installing and Administering Avaya Collaboration Unit CU360
Comments on this document? infodev@avaya.com
Description
The type of the call.
The options are:
• Audio-Video
• Audio-Only
The specific bandwidth to use for calls.
This field is optional. If you do not configure a
specific bandwidth to use, Avaya CU360 uses the
maximum available bandwidth.
42