Upgrading The Avaya Scopia; Understanding Presence - Avaya Scopia XT7000 Series Deployment Manual

Advanced Configuration of the XT Series

Upgrading the Avaya Scopia

Drive
About this task
Your Avaya Scopia
Before you begin
Check if a later version is available by accessing the Avaya site as explained in
Series on page 185. If a later version is available, download it and copy to the USB drive.
Procedure
1. Turn on the XT Series and wait for the menus to appear.
2. Insert the USB drive into one of the USB ports on the back panel of the XT Codec Unit.
The upgrade procedure begins automatically.
Caution:
Do not shut down the XT Series until the upgrade has completed.
3. Follow the instructions displayed on the screen.
The system restarts automatically after the upgrade procedure is completed.
4. The upgrade procedure may automatically continue after the reboot, and therefore reboot
again. Wait a few minutes to ensure that the upgrade procedure is completed.
5. If the upgrade fails, see
Related links
Updating the XT Series

Understanding Presence

Presence is an indication of the availability of an individual at a point in time and their readiness to
communicate across a set of services such as telephony and instant messaging. The person's
January 2017
®
®
XT Series can be updated by a USB drive containing the firmware.
Figure 131: The USB ports on the back panel
USB Software Upgrade Failure
on page 185
Avaya Scopia
Comments on this document? infodev@avaya.com
XT Series Software Using a USB
on page 252.
®
XT Series Deployment Guide
Updating the XT
190