Presenting Content Using An Avaya Scopia ® Xt Series Endpoint - Avaya Scopia XT7100 User Manual

Participating in Meetings
Related Links
Participating in Meetings
Presenting Content Using an Avaya Scopia
Connecting a Computer to the XT Series
Presenting Content by Connecting your Computer to the XT Series
Presenting Content Using an Avaya Scopia
About this task
Users can present content from a laptop on an XT Series monitor without connecting it to the XT
Codec Unit, using the Avaya Screen Link feature. If you are also using the XT Series for a
videoconference, the content is shared with all participants of the meeting, both located in the same
room and remote.
Depending on its security configuration, an XT Series endpoint behaves in one of the following ways
when you to connect to it:
• Rejects Screen Link — the endpoint does not allow anyone to connect to it for screen sharing.
• Requires password — the endpoint generates a one time password that you need to enter on
your laptop to connect to it.
• Seamlessly authenticates Scopia
Before you begin
• If you want to present content to local participants only, make sure that the XT Series endpoint
is not currently used for a videoconference. If you are using the endpoint for an audio-only call,
you can share the presentation with participants in the meeting room.
• To present content from your laptop, bring the laptop into a videoconference room equipped
with an XT Series endpoint.
• To display your computer's content on the XT Series using Avaya Screen Link, your computer
must have Scopia
computer and endpoint are in different networks, make sure there is no NAT or firewall
between them.
Procedure
1. Choose an XT Series endpoint from the list of endpoints found by Scopia
a. Right-click the Scopia
®
Avaya Scopia XT Series User Guide
54
on page 49
®
on page 57
®
Desktop Client and connects to it
®
Desktop Client installed and be in the same network as the endpoint. If the
®
Desktop icon
Comments? infodev@avaya.com
XT Series Endpoint on page 54
on page 59
®
XT Series Endpoint
and select Screen Link > Start Screen Link.
®
Desktop Client:
April 2015