Configuring Advanced Regional Audio And Video Settings - Avaya Scopia XT7000 Series Deployment Manual

Advanced Configuration of the XT Series

Configuring Advanced Regional Audio and Video Settings

About this task
After you set the country and language of the device in the Quick Setup Wizard, the system defaults
to the audio and video standards of that country. This section details how to change those settings if
required.
Procedure
1. Access the XT Series web interface, as described in
page 80.
2. Select Administrator Settings > System > Location.
3. Define regional settings as described in
page 154.
Table 43: Configuring regional information
Field Name
System name
Country
Language
January 2017
Figure 101: Setting regional information
Table 43: Configuring regional information
Description
Enter the name which appears in the local endpoint title bar and in the
remote endpoint interface (if connected).
Select the location of the XT Series. This populates the other fields
automatically.
Select the language used in the XT Series endpoint's interface.
®
Avaya Scopia XT Series Deployment Guide
Comments on this document? infodev@avaya.com
Accessing XT Series Web Interface on
on
Table continues...
154